LARGE Range Pipefloats
Pipefloats, an industry standard for the floatation of pipes, hoses and cables for dredging, mining and marine applications.
An easy to install solution that allows pipes to bend and flex, while maintaining low resistance to waves, wind and current.
Our Pipefloats are 100% Australian made and Designed
PRODUCT INFORMATION
LARGE RANGE
PIPEFLOAT SPACING GUIDE
Water : 4 sets for every 12 meters of pipe
Slurry : 7 sets for every 12 meters of pipe
eg. 100m Waterpipe: (100m / 12m) x 4 = 33 Floats
recommended for half submergence
PACKING GUIDE
MAX PALLET LOAD
1.2m x 1.2m x 2.20m (height)
2 Sets per pallet
Approx Weight 130 kg
*RESERVE BUOYANCY is the weight the float will carry before full submergence.
*O/D is the Outside Diameter.
*Dimensions and weights are nominal.
A pipefloat set comprises:
- 2 pipefloats halves
- A galvanised assembly kit which includes:
- 4 Rods
- 8 Nuts
- 8 Washers
- Manufactured from polyethylene.
- Manufactured in safety orange.
- Stainless steel inserts used in crush areas.
- All floats are pressure tested prior to dispatch.
- Recyclable and VOC Free.
- Australian made and designed.
- Specifications are subject to change without notice.
Marine Grade, SAE 316 stainless steel assembly kits for
corrosive environments are available at an additional cost.
- Kit includes: 4 Rods, 8 Nuts and 8 Washers.
